Products

High Concentration Oil in Water Analyser (MS1700)

ㆍProduct Name	MS1700
ㆍMeasuring Items	Oil in water : VOC, Fuel oil, BTEX, PAH, etc.
ㆍManufacturer	Multisensor Systems
ㆍDetection Range	1 ~ 100 ppm
ㆍDisplay Range	0 ~ 100 ppm (Configurable on commissioning)
ㆍRepeatability	-5 ~ +5% (+/- 15% from 20 to 100 ppm)
ㆍAccuracy	-15 ~ +15% (+/- 15% from 20 to 100 ppm)
ㆍMeasurement Frequency	Continuous (15, 20, 30, 60 minutes modes available on request)
ㆍAmbient Temperature	0 ~ 40°C
ㆍWater Temperature	1 ~ 40°C
ㆍAnalogue Output	4 ~ 20mA (Scalable to range required, max load 900Ω)
ㆍAnalogue Output Isolation	400V DC
ㆍRelay Voltage	50V (Alarm and Fault Relays with NO contacts)
ㆍRelay Current	5A
ㆍService Interface	USB-A to PC (Using Multisensor Software provided)
ㆍData Storage	μSD Card (6 months)
ㆍInstrument Case	IP65
ㆍInstrument Weight	5kg
ㆍInstrument Dimensions	300 x 200 x 132mm
ㆍSampling Chamber Material	Stainless Steel (Optional: PVC)
ㆍSampling System Weight	12kg (Without water)
ㆍSampling System Dimensions	570 x 490mm (Mounted on its own PVC backboards)
ㆍSampling System Capacity	3 litres
ㆍFlow Limit Switch	Contacts closed if flow below set point (Option available on request)
ㆍWater Flow Rate	2 L/min
ㆍSupply Voltage	AC Version: 90 ~ 240V AC, DC Version: 10 ~ 15V DC (50Hz or 60Hz)
ㆍPower Consumption	9W (Typical 7W during operation)

High Concentration Oil in Water Analyser (MS1700): The MS1700 is a high concentration oil in water analyser is designed to monitor water in industrial processes and to detect fuels and other VOCs in drains and waste water networks.
The MS1700 utilises a contactless measurement technique based on Henry’s Law, sensing headspace gases or volatiles in the sampling tank provided, and provides a measurement system with very low maintenance requirements. Thanks to the clever design and technology the sensor never touches the water. This results in reduced drift, virtually no fouling, no sensor cleaning and very low maintenance.
The MS1700 has a wide dynamic range that allows it to be used in a wide variety of environments and up to 100 ppm.
The concentration of volatile organic compounds (VOCs) and water vapor in the headspace increases until equilibrium is reached with the concentration in the water. A sample of gas is then taken from the headspace and the response analysed to provide a concentration in ppm of contaminants in the water.